/*
This section is the Men and Mice recommended setup of the database instance. If your organization has different
policies then we recommend having your DBA setup the instance according to your polices and skipping to
the create database part below.
*/
-- check NOCOUNT on at session level, perf increase in procedural execs esp
SET NOCOUNT ON;
EXEC sys.sp_configure N'show advanced options', N'1' RECONFIGURE WITH OVERRIDE
GO
EXEC sys.sp_configure N'min server memory (MB)', N'64'
GO
RECONFIGURE WITH OVERRIDE
GO
EXEC sys.sp_configure N'show advanced options', N'0' RECONFIGURE WITH OVERRIDE
GO
USE [master]
GO
--set default locations for logs and data (in the example we are using C:\Data change to your setup)
--EXEC xp_instance_regwrite N'HKEY_LOCAL_MACHINE', N'Software\Microsoft\MSSQLServer\MSSQLServer', N'DefaultData', REG_SZ, N'<datafilepath>' ---put path here for example 'D:\Data for the data
EXEC xp_instance_regwrite N'HKEY_LOCAL_MACHINE', N'Software\Microsoft\MSSQLServer\MSSQLServer', N'DefaultData', REG_SZ, N'C:\Data' ---put path here for example 'D:\Data for the data
GO
--EXEC xp_instance_regwrite N'HKEY_LOCAL_MACHINE', N'Software\Microsoft\MSSQLServer\MSSQLServer', N'DefaultLog', REG_SZ, N'<logfilepath>' ---put path here for example L:\Logs for the logs
EXEC xp_instance_regwrite N'HKEY_LOCAL_MACHINE', N'Software\Microsoft\MSSQLServer\MSSQLServer', N'DefaultLog', REG_SZ, N'C:\Data' ---put path here for example L:\Logs for the logs
GO
--Temp: sett default locations for temp log and data (in the examle we use C:\Data)
use master
go
--Alter database tempdb modify file (name = tempdev, filename = '<tempfilepath>\tempdb.mdf')
Alter database tempdb modify file (name = tempdev, filename = 'C:\Data\tempdb.mdf')
go
--Alter database tempdb modify file (name = templog, filename = '<logfilepath>\templog.ldf')
Alter database tempdb modify file (name = templog, filename = 'C:\Data\templog.ldf')
go
/************************************************************************************************/
--Restart SQL Server....
/************************************************************************************************/
USE [master]
GO
/*
add one tempfile per core upto eight cores at a fixed size per file turning off autogrow this depends
on how much storage space and how busy the server is, shown below create eight tempfile all 500mb in size
*/
ALTER DATABASE [tempdb] MODIFY FILE ( NAME = N'tempdev', SIZE = 512000KB , FILEGROWTH = 0)
GO
--ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_2', FILENAME = N'<tempfilepath>\tempdev_2.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_2', FILENAME = N'C:\Data\tempdev_2.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
GO
--ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_3', FILENAME = N'<tempfilepath>\tempdev_3.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_3', FILENAME = N'C:\Data\tempdev_3.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
GO
--ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_4', FILENAME = N'<tempfilepath>\tempdev_4.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_4', FILENAME = N'C:\Data\tempdev_4.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
GO
--ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_5', FILENAME = N'<tempfilepath>\tempdev_5.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_5', FILENAME = N'C:\Data\tempdev_5.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
GO
--ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_6', FILENAME = N'<tempfilepath>\tempdev_6.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_6', FILENAME = N'C:\Data\tempdev_6.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
GO
--ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_7', FILENAME = N'<tempfilepath>\tempdev_7.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_7', FILENAME = N'C:\Data\tempdev_7.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
GO
--ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_8', FILENAME = N'<tempfilepath>\tempdev_8.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev_8', FILENAME = N'C:\Data\tempdev_8.ndf' , SIZE = 512000KB , FILEGROWTH = 0)
GO
ALTER DATABASE [tempdb] MODIFY FILE ( NAME = N'templog', SIZE = 5120000KB , MAXSIZE = 10240000KB , FILEGROWTH = 1024000KB )
GO
--------------------------------------- Instance level configuration ends --------------------------------------------
/*
Here starts the database creation and configuration for the Men and Mice database.
*/
/*
After creating the database we recommend that these minimum database settings are completed:
-Configure the the backup settings according to your organizations backup policy.
-You create a sheduled job to reindex the database (e.g. every saturday at 4:00).
-
*/
-- check instance default collation settings
select convert(sysname, serverproperty('collation'))
/*
MM requires case sensitive and accent sensitive collation - We recomend case sensitive and accent sensitive wersion of default collation.
select the correct collation name :select replace( replace(convert(sysname, serverproperty('collation')), '_CI_', '_CS_'), '_AI', '_AS')
The collation can be set at database level later in this script (Se CREATE DATABASE command)
*/
/*
Create the database instance
If you have preference to where the data files should be then you can change this script
(you will have to make sure that the path entered exists)
*/
/* This deletes the database - please make absolutely certain that this is a database that
can be deleted.
*/
IF EXISTS (SELECT name FROM sys.databases WHERE name = N'mmsuite')
begin
USE [master]
ALTER DATABASE [mmsuite] SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DROP DATABASE [mmsuite]
end
GO
/*
This create statement is intended for small scale database. For larger database setups (> tens of GBs) then you must
consult with your database administrators, and have them contact Men and Mice support team for additional information.
*/
CREATE DATABASE [mmsuite] ON PRIMARY
(
NAME = N'mmsuite', FILENAME = N'C:\Data\mmDatabase\mmsuite.mdf' , SIZE = 20480KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB ),
FILEGROUP [mmsuiteData] DEFAULT
( NAME = N'mmsuite_data', FILENAME = N'C:\Data\mmDatabase\mmsuite_data.ndf' , SIZE = 20480KB , MAXSIZE = 200GB, FILEGROWTH = 1024KB )
LOG ON
( NAME = N'mmsuite_log', FILENAME = N'C:\Data\mmDatabase\mmsuiteLog.ldf' , SIZE = 20480KB , MAXSIZE = 20GB , FILEGROWTH = 1024KB)
COLLATE SQL_Latin1_General_CP1_CS_AS -- CI is required so chosing the default with CS_AS ending (case sensitive and Accent sensitive)
GO
EXEC dbo.sp_dbcmptlevel @dbname=N'mmsuite', @new_cmptlevel=100 /*ms*/
GO
IF (1 = FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'))
begin
EXEC [mmsuite].[dbo].[sp_fulltext_database] @action = 'disable'
end
GO
/*
Database setings
*/
ALTER DATABASE [mmsuite] SET ANSI_NULL_DEFAULT OFF
GO
ALTER DATABASE [mmsuite] SET ANSI_NULLS OFF
GO
ALTER DATABASE [mmsuite] SET ANSI_PADDING OFF
GO
ALTER DATABASE [mmsuite] SET ANSI_WARNINGS OFF
GO
ALTER DATABASE [mmsuite] SET ARITHABORT OFF
GO
ALTER DATABASE [mmsuite] SET AUTO_CLOSE OFF
GO
ALTER DATABASE [mmsuite] SET AUTO_CREATE_STATISTICS ON
GO
ALTER DATABASE [mmsuite] SET AUTO_SHRINK OFF
GO
ALTER DATABASE [mmsuite] SET AUTO_UPDATE_STATISTICS ON
GO
ALTER DATABASE [mmsuite] SET CURSOR_CLOSE_ON_COMMIT OFF
GO
ALTER DATABASE [mmsuite] SET CURSOR_DEFAULT GLOBAL
GO
ALTER DATABASE [mmsuite] SET CONCAT_NULL_YIELDS_NULL OFF
GO
ALTER DATABASE [mmsuite] SET NUMERIC_ROUNDABORT OFF
GO
ALTER DATABASE [mmsuite] SET QUOTED_IDENTIFIER OFF
GO
ALTER DATABASE [mmsuite] SET RECURSIVE_TRIGGERS OFF
GO
ALTER DATABASE [mmsuite] SET AUTO_UPDATE_STATISTICS_ASYNC OFF
GO
ALTER DATABASE [mmsuite] SET DATE_CORRELATION_OPTIMIZATION OFF
GO
ALTER DATABASE [mmsuite] SET PARAMETERIZATION SIMPLE
GO
ALTER DATABASE [mmsuite] SET READ_WRITE
GO
/* Set the recovery mode - recommended FULL */
ALTER DATABASE [mmsuite] SET RECOVERY FULL
GO
ALTER DATABASE [mmsuite] SET MULTI_USER
GO
ALTER DATABASE [mmsuite] SET PAGE_VERIFY CHECKSUM
GO
/*
Creates the login for the mmCentral service - this is a MSSQL authenticated login so the server needs
to be set to allow such. You can either change the password in this segment or change the password for
this user in the database later. DO NOT use the default password given in this file. Experation
policy is set to off as this is a service not a user account.
If you are using Windows integrated authentication then you need to accociate the DBUser (on the mmsuite
(defined later))with the Windows user running mmCentral instead of the mmSuiteDBUser login.
*/
IF EXISTS (SELECT * FROM sys.server_principals WHERE name = N'mmSuiteDBUser')
DROP LOGIN [mmSuiteDBUser]
GO
USE [mmsuite]
GO
/* NOTE change the password according to your company policy */
CREATE LOGIN [mmSuiteDBUser] WITH PASSWORD=N'1234',
DEFAULT_DATABASE=[mmsuite],
CHECK_EXPIRATION=OFF,
CHECK_POLICY=OFF
GO
/*
Create a user on the new database. If you are using Windows login then the login needs to point to the Windows user,
running the mmCentral service.
*/
USE [mmsuite]
GO
CREATE USER [mmSuiteUser] FOR LOGIN [mmSuiteDBUser]
GO
/*
Create a role for mm user.
*/
CREATE ROLE mmSuiteRole
/*
Grant normal access
*/
USE [mmsuite];
EXEC sp_addrolemember db_datawriter, mmSuiteRole
EXEC sp_addrolemember db_datareader, mmSuiteRole
/*
Authorization, the mmCentral service handles updates of the database when a new version of the system is started for the first time
To make that possible the following needs to be granted. If youre database administration policy does not agree with granting these
rights permanently, then please contact Men and Mice support for alternatives.
The mmCentral service runs upgrade scripts on start up, - if needed. This only occurs when starting new version, so ddladmin only
needs to be given to the role when the system is being run for the first time or is being upgrated. ddladmin can therfore be revoked
when the system has been started and then given to the role only on upgrades.
Another alternative is to remove ddladmin rights and get an upgrade script from Men and Mice that has to be run by the DBA.
The same considerations apply to Grant Create Table.
*/
ALTER AUTHORIZATION ON SCHEMA::[db_ddladmin] TO mmSuiteRole
GO
USE [mmsuite]
GO
GRANT CREATE TABLE TO mmSuiteRole
GO
/*Add our user to the mmCentral role*/
USE [mmsuite]
GO
EXEC sp_addrolemember mmSuiteRole, mmSuiteUser
GO
/*
Create the default schema for the new user. It is important that the user runing mmCentral has the schema as default schema.
*/
CREATE SCHEMA mmCentral AUTHORIZATION mmSuiteUser
GO
ALTER user mmSuiteUser with default_schema = mmCentral
GO
/**
Now you can start mmCentral, it starts by creating the tables needed.
**/